BOATsmart! Base de connaissances du Canada
Module 03 - Before Heading Out
Winterization and Storage
Winterization and storage
When preparing to winterize your craft, be certain to read your owner’s manual. If you are unsure of the appropriate winterization procedure for your type of boat, visit your local marine dealer for advice and service. The following is an overview of winterization and storage procedures:
STEP 1
Use an environmentally-friendly marine detergent or algae remover to clean the hull of your craft.
STEP 2
Empty the bilge of any excess water and clean it using soap and water (or a marine-grade bilge cleaner).
STEP 3
Drain and flush the engine’s cooling system.
STEP 4
Fill the boat’s fuel tank.
STEP 5
Clean (or replace) the fuel filter.
STEP 6
Remove the spark plugs and fog the engine cylinders with a rust inhibitor.
STEP 7
Lubricate all moving parts.
STEP 8
Be sure to clean off any excess grease, lubrication, dirt and marine life.
